Our CDBs offer the simplicity of a plug and play install saving valuable time on site and can be energy saving. All our units are pre-wired and commissioned prior to despatch to eliminate any chance of wiring faults and can be changed or re-positioned without major disruption.
Rigel is the popular standard choice for connection of luminaries to either presence, absence or conventional switches with the added feature of optional daylight hold off and low voltage switching
All CDB’s require a 4 core feed to operate correctly.
Each CDB has twelve 4 Pole and three RJ45 ports assigned as follows:
1x 4 Pole Unswitched in for the power in feed.
1x 4 Pole Unswitched out to enable other modules to be connected to the same circuit.
1x RJ45 SELV Switch port for a SELV wall switch.
2x RJ45 SELV Switch ports for a SELV PIR.
10x 4 Pole luminaire outputs (split 5 to a channel for a 2 channel CDB).
Multiple SELV switch points and/or PIR’s can be added with the use of additional RJ45 leads and/or RJ45 3-way splitters.
Multiple switches can be installed with the use of the same RJ45 SELV wall switch drop lead.
If used the channel switches must be momentary push to make type switches.
Emergency testing facility built in via a SELV wall switch (if required).